Fanuc 21i Control
Free mp3 songs sites. Fanuc 0i/0i Mate Fanuc 10/11/12 Fanuc Series 15 Fanuc 15i Fanuc 16i 18i Fanuc 21 Fanuc 21i Fanuc Alarms Fanuc Spindle Alarms Fanuc 6M 6T Alarms Mill Programming G68 Coordinate Rotation G72.1 Rotational Copy G72.2 Linear Copy G73 High Speed Drilling G74 Left-hand Tapping G76 Fine Boring Cycle G81. Fanuc 21i Programmi ng Manual Marina Weber (2008) Repository Id: #5fd325ea646c9 Fanuc 21i Programming Manual Vol. XV Page 1/9 4347120. Dear Abby: Relatives pressed into manual labor by aunt who lives alone I realize she has no kids to take care of her, but I don't think I should be. Fanuc 21i Manuals Instruction Manual and User Guide for Fanuc 21i. We have 18 Fanuc 21i manuals for free PDF download.
EMCO WinNC GE Series Fanuc 21 TB programming G codes / M codes / Cycles complete lists.
Fanuc 21i-t Manual
G Codes
| G Code | Description |
|---|
| G00 | Positioning (rapid traverse) |
| G01 | Linear interpolation (feed) |
| G02 | Circular interpolation clockwise |
| G03 | Circular interpolation counterclockwise |
| G04 | Dwell |
| G7.1 | Cylindrical Interpolation |
| G10 | Data setting |
| G11 | Data setting Off |
| G12.1 | Polar Coordinate Interpolation ON |
| G13.1 | Polar Coordinate Interpolation OFF |
| G17 | Plane selection XY |
| G18 | Plane selection ZX |
| G19 | Plane selection YZ |
| G20 | Longitudinal turning cycle |
| G21 | Thread cutting cycle |
| G24 | Face turning cycle |
| G28 | Return to reference point |
| G33 | Thread cutting |
| G40 | Cancel cutter radius compensation |
| G41 | Cutter radius compensation left |
| G42 | Cutter radius compensation right |
| G70 | Inch data input |
| G71 | Metric data input |
| G72 | Finishing cycle |
| G73 | Stock removal in turning |
| G74 | Stock removal in facing |
| G75 | Pattern repeating |
| G76 | Deep hole drilling, cut-in cycle in Z |
| G77 | Cut-in cycle in X |
| G78 | Multiple threading cycle |
| G80 | Cancel cycles (G83 up to G85) |
| G83 | Drilling cycle |
| G84 | Tapping cycle |
| G85 | Reaming cycle |
| G90 | Absolute programming |
| G91 | Incremental programming |
| G92 | Coordinate system setting, spindle speed limit |
| G94 | Feed per minute |
| G95 | Feed per revolution |
| G96 | Constant cutting speed |
| G97 | Direct spindle speed programming |
| G98 | Return to initial plane |
| G99 | Return to withdrawal plane |
Fanuc 21i-t Manual Pdf
M Codes
| M Code | Description |
|---|
| M0 | Programmed stop |
| M1 | Programmed stop. conditional |
| M2 | Program end |
| M3 | Spindle ON clockwise |
| M4 | Spindle ON counterclockwise |
| M5 | Spindle OFF |
| M8 | Coolant ON |
| M9 | Coolant OFF |
| M13 | Driven tools ON clockwise |
| M14 | Driven tools ON counterclockwise |
| M15 | DRIVEN TOOLS OFF |
| M20 | Quill FORWARD |
| M21 | Quill BACKWARD |
| M23 | Collecting tray BACKWARD |
| M24 | Collecting tray FORWARD |
| M25 | Clamping device OPEN |
| M26 | Clamping device CLOSE |
| M30 | Main program end |
| M32 | Program end for loading operation |
| M52 | Round axis operation (C-axis ON) |
| M53 | Spindle operation (C-axis OFF) |
| M57 | Spindle oscillate ON |
| M58 | Spindle oscillate OFF |
| M67 | Bar feed / loading magazine feed ON |
| M68 | Bar feed / loading magazine feed OFF |
| M69 | Bar change |
| M71 | Blow-out ON |
| M72 | Blow-out OFF |
| M90 | Manual clamping chuck |
| M91 | Tensile clamping device |
| M92 | Pressure clamping device |
| M93 | Final position monitoring OFF |
| M94 | Bar feed / loading magazine activate |
| M95 | Bar feed / loading magazine deactivate |
| M98 | Subroutine call |
| M99 | Subroutine end. jump command |
Ge Fanuc 21i M
Fanuc Series 21-t Manual
Addresses
Fanuc 21i Tb Manuals Pdf
| Address | Description |
|---|
| O | program number 1 to 9499 for part programs and subroutines |
| N | block number 1 to 9999 |
| G | path function |
| X, Z | position data in absolute values (X also dwell time) |
| U, W | position data in incremental values (U also dwell time) |
| R | radius, taper value, cycle parameter |
| C | chamfer |
| I, K | circle parameter |
| F | feed rate, thread pitch |
| S | spindle speed, cutting speed |
| T | tool call (tool correction) |
| M | miscellaneous function |
| P | dwell, subprogram call, cycle parameter |
| Q | cycle parameter |
| ; | block end |
